|
-
Fri Jun 25, 2004, 03:28 AM
#1
making tanks
hi wood anyone no how were u can get
the silycon to make my tanks any help wood be good as
am in vic
thanks
discman
-
Fri Jun 25, 2004, 10:31 AM
#2
Bunnings just called silicone with aquarium use written on it, kind of bluey greenish color. I made one tank but unless you have a cheap supply of glass its the same costs as buying it.
-
Fri Jun 25, 2004, 01:16 PM
#3
I'm making a tank with plyboard and hard wood mix because its going to be a all in one tank and stand
-
Fri Jun 25, 2004, 02:31 PM
#4
Bit of help...
http://www.simplydiscus.com/forum/in...;threadid=9416
The epoxy will set you up for about $40 a bottle from memory, i was going to do it once, but never got round to it..
Keep us posted on how you go, gotta love DIYs....i think 3/4 of my equipment is DIY.
Good luck
Scott
P.S Let me know if your going to use glass or perpex for the front panel.
-
Sat Jun 26, 2004, 08:17 AM
#5
Moderator
try this site
www.aquarticles.com
heaps of good stuff on tank building and lots of other goodies as well
-
Mon Jun 28, 2004, 01:12 AM
#6
i am going to yous glass for the front is it hard to do puting it together or is it eze
-
Mon Jun 28, 2004, 04:00 AM
#7
use a silicone with ACETIC CURE info will be on pack. silastic 732 is industrial cheaper type and fine, keep away from nuetral and other cures. leave tank open and construct in well ventilated area cause actetic fumes stinky. leave to go off for 5 days or week advised b4 filling with water.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
| |