|
-
Wed Aug 10, 2005, 11:52 AM
#1
Increasing WPG
On my 180 gallon i currently use 2 150 watt MHs. But i order some 130 watt PC 6400K blubs from reef online, thinking that they what be alot smaller then what there actually are, so now im stuck in trying to put them into my hood. They are 350mm long and 90mm in dia. So how anyone else use these or knowing or a method of supporting them, they are end heavy so with the sockets the came with i didnt thinnk that they would be able to support it to well. anyone got any ideas?
here are some pictures
http://i5.photobucket.com/albums/y16...r/DSC01654.jpg
normall AA bat.
http://i5.photobucket.com/albums/y16...r/DSC01655.jpg
Thanxs Tim
-
Fri Aug 12, 2005, 01:32 AM
#2
Tim,
Looks like the same globes i have just been given and am thinking of installing,wanna test out power consumption first, was going to write up a review once tried (you might think of the same to compare results).
Have been told that attaching the light fitting (assume you have the ceramic round one that goes direct to mains) to a batten, then behind this have a backing plate (screws from ceramic through this and batten) to spread some of the stress from the added weight of the globe over the area of the batten. hope this makes sense.
the globe will support it's own weight length ways but it's spreading the weight over the side of your hood is going to be a hassle, maybe something insulated will spring to mind. I am going to hang mine from the roof of my fish-house so i can't comment on how well this would work but the distributor here, tells me that it can be done using the above approach and a sparky will know what sort of backing plate to use.
Brenton
btw i assume you know these lights don't need ballast hence their size
Who's a happy little french fry?
-
Fri Aug 12, 2005, 12:43 PM
#3
yea i know about the ballast, one reason why i got them. Yea i do have the ceramic socket. I dont understand the "but it's spreading the weight over the side of your hood is going to be a hassle, maybe something insulated will spring to mind" part, i was thinking that if it is on the backing plate it shouldnt be a problem if done correctly. will have to try it out first
-
Fri Aug 12, 2005, 09:10 PM
#4
Moderator
the ceramic's are a new insert into a fitting
you can buy these (see pics)
i got these yesterday from Ideal timing
Q. i thought they had internal ballast in the base of the bulb? is that right?
-
Fri Aug 12, 2005, 11:17 PM
#5
yea, they do have in in the bottom of the blub, they would be good to use but the blubs are like 5x the size lol
-
Sat Aug 13, 2005, 01:45 AM
#6
Moderator
i know there bigger but the fittings are universal arn't they?
-
Sat Aug 13, 2005, 07:24 AM
#7
well no, these are the same size as your industrial MHs alot bigger then normal ones,
-
Sun Aug 14, 2005, 09:18 AM
#8
fits marine specs great, trying them on plant growth, intensely bright, like i mean i am thinking of wearing sunnies while looking at it or fitting a shade but i'm worried about heat
Who's a happy little french fry?
-
Sun Aug 14, 2005, 11:35 AM
#9
well they dont have as much heat as mhs and are about same brightness as my mhs
-
Mon Aug 15, 2005, 02:02 AM
#10
AussieStar,
Do you have any idea what these cost per month to run? Haven't been able to find any info on electrical draw.
Brenton
Who's a happy little french fry?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
| |