Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Larvae
    Join Date
    Sep 2004
    Location
    Sydney, Hurstville
    Posts
    142

    Where to buy Electronic Solenoid Valve

    Where can i buy some electric solenoid value (or should i call it something else)??

    what i want is like a electric ball valve, if power on then let water flows, otherwise shut the valve, no water will flow through!!

    Do you understand what i mean ??

    I need this valve because in case of power blackout, the overflow from my tanks will draw about 15% max from each of my tanks and my sump cannot take this amount of water so it will spill all over the floor !!

  2. #2
    Larvae
    Join Date
    Aug 2004
    Location
    Melbourne
    Posts
    148
    bunnings and irrigation shops have those solonoids that ur looking for.

  3. #3
    Medium Discus
    Join Date
    Jul 2004
    Location
    Eastern Suburbs... VIC
    Posts
    671
    Irrigation solenoids (well at least the cheap ones I have seen) only work with high pressure...I have not found any irrigation solenoids that will work on such a low pressure such as a gravity fed line from a tank. Make sure you ask before you buy as the irrigation solenoid relies on the water pressure to open the valve.

    If you find one please tell me as I am looking for two low voltage solenoids for my drain / fill lines. You can get 240VAC solenoids cheap $25.00 (4l/min valve seat) however I am not willing to take the risk with 240VAC types.
    My online Aquarium www.rjconway.homeip.net

  4. #4
    Moderator kalebjarrod's Avatar
    Join Date
    Jun 2004
    Location
    Tamborine, Farm Boy
    Posts
    2,478
    bad inferno is almost right

    i have found one variety of solienoid valve from bunnings that is waht you would actully call an electronic ball valve. i think it was a nylex brand about $30.00 each. it usees power to open a ball valve and then uses power to close the ball valve, very simple battery powered soleinoid, might not have enough timing settings on it to make it work properly?

    i hate to recommend bunnings for irrigation parts, they are WAY to expensive, but they have it
    RYAN --- DIY ROCKS!

  5. #5
    Medium Discus
    Join Date
    Jul 2004
    Location
    Eastern Suburbs... VIC
    Posts
    671
    Interesting that a battery has enough current to close the valve. If you can get to the solenoid coil you could control the device yourself and forget the onboard timer and batteries. Luv the idea of low power. I'll check it out
    My online Aquarium www.rjconway.homeip.net

  6. #6
    Larvae
    Join Date
    Sep 2004
    Location
    Sydney, Hurstville
    Posts
    142
    All i want is a valve that is run off by normal 240V when there is power just opens it and when the power is out shuts it.

    Can someone recommend me a irrigation store in Sydney area that will store such valve !!

    Thx
    I'm so addicted to Discus, plz help

  7. #7
    Moderator kalebjarrod's Avatar
    Join Date
    Jun 2004
    Location
    Tamborine, Farm Boy
    Posts
    2,478
    heaps of valves out thier that do what you want UNDER PRESURE

    i run about 120 such valves each day at work, only ever seen this one type of valve that would be able to work under gravity or limited presure
    RYAN --- DIY ROCKS!

  8. #8
    Medium Discus
    Join Date
    Jul 2004
    Location
    Eastern Suburbs... VIC
    Posts
    671
    Billy,
    Are you aware that 240VAC can kill you or your family ? A solenoid valve is generally not a device that comes with a 240VAC plug attached and have suitable insulation that protects the user.

    I would recommend you buy a 24VDC solenoid, Asco are very popular and then buy yourself a 24VDC transformer. this is not a cheap option however.
    http://www.southerncontrols.com.au/d...rl=1668&Type=2

    If you persist with 240VAC go and find a washing machine repair shop and ask them on how you can do this with gravity (you will have to know your flow rate. They have 240VAC solenoids. The other option is just buy a hand valve $5.00 each and just hope you are at home when the power goes off so you can isolate your tanks

    Come to think of it, if you are thinking of putting this valve on your return line to your sump I doubt very very much that you could afford such a valve with a large orifce such that it will allow ~100's of litres an hour to pass back into the sump.
    My online Aquarium www.rjconway.homeip.net

  9. #9
    Moderator kalebjarrod's Avatar
    Join Date
    Jun 2004
    Location
    Tamborine, Farm Boy
    Posts
    2,478
    the other way around the problem is to install a automatic power failure switch

    these devices will automaticlly turn on 12 volt air pumps, 12v water pumps and even sound an alarm (this is no good if you are not there!)
    RYAN --- DIY ROCKS!

  10. #10
    Medium Discus
    Join Date
    Jul 2004
    Location
    Eastern Suburbs... VIC
    Posts
    671
    Now thats a good idea Ryan

    Buy a UPS (Uniteruptable Power Supply). They have come down heaps in price and a small unit is generally used for computers, $200 + depends on how long you want it to run.

    If you just run your pump (60-100 watt I asume) through the UPS you may end up with 1-2 hours of run time. A PC power supply is generally rated at 200-300 watts. If you want to go down this path the pump is an inductive load so the surge is generally 7 times the normal current when starting. Something to consider when specifying the UPS. Powerware or Sola are good brands....and can be purchased through a PC supplier.
    My online Aquarium www.rjconway.homeip.net

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •