PDA

View Full Version : UPDATED - Aluminum Co2 cylinder (Size D - 6kg) now on eBay!!


buttnaked
Thu Dec 08, 2005, 11:08 AM
I have a near new Alloy Co2 cylinder for sale. It has been certifed by Australian BOC with Aust BOC approved Co2 valve.

Suitable for Co2 injection for planted Aquariums (no need for regular refills like the Dupla cylinders - can last up to 6 -7 months use with a 4x2x2 tank.
It fits perfectly under most tank cabinets.

Spec's -

D size
Gross weight with Co2 filled (10.5kg) without Co2 (6kg)
Diameter - 7inches
Height - 20.5 inches
SERVICE PRESSURE: 1800 PSI / 124 BAR

TEST PRESSURE: 3000 PSI / 207 BAR

MATERIAL: cylinder is produced from high strength aluminum alloy 6061-T6.

FINISH: Brushed body with natural unpainted dome is standard.


See link on eBay (opening bid $450)

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=7732474867&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1

Call - 0410 314 028

Note: Dupla Depot, Aluminium Bottle 1.5kg cost $300
goldfish
Fri Dec 09, 2005, 01:13 AM
how long hav u had this for?
will i be able to refill it at any place or BOC only?.and if BOC only, do i need to show paper?
Mulisha
Fri Dec 09, 2005, 01:19 AM
umm goldfish i think you can fill that cylinder any where u want I have a BOC cylinder and i fill it at my LFS for around $5 it's only a small 5.5kg though..

HTH

His cylinder might be different to mine i'm not sure.. :?
buttnaked
Fri Dec 09, 2005, 04:37 AM
how long hav u had this for?
will i be able to refill it at any place or BOC only?.and if BOC only, do i need to show paper?

Under 12 months and no you don't need any special paper, most good aquarium places will able to fill it.
buttnaked
Sun Dec 18, 2005, 04:13 AM
Update...BUMP!
Proteus
Tue Dec 20, 2005, 11:14 PM
Several replies were removed due to the tone and nature of the post.

Here is some further info regarding the authenticity of this cylinder.


This cylinder was purshased in US with a US valve. I had to change it to comply with Aust Regulation. It took me 8 weeks of headaches to get it approved by BOC Head office Test Shop in Wetherill park, Sydney. I had to provide proof of ownership and custom paperwork for them just to change my valve + testing and stamp of approval for safety.