robfishfan
Wed Sep 15, 2010, 07:34 AM
Full breeders setup for sale , please ring for all questions that are not answered below .
The setup is up and running in chatswood and can be viewed any time by serious buyers .
There are 13 tanks on the rack and all are fully plumed with PVC piping , the setup is run by one water pump and one air pump .
Tanks 10 x 700mm wide x 350mm high x 460mm deep all with lids .
plus one tank same size as above that is split in to two for catfish and is plumed as well ,
last tank is separate from the system and can be used for fry .
The rack is pine 70x35mm painted , 3900mm long x 2000mm high x 600mm deep
The PVC plumbing has taps and overflow pipes for each tank and all drain to one spot ,
There are two power boards installed for running lights .
1 x air compressor HAILEA 25W
1 x water pump MAGNET PUMP MD-40 capacity 52/62 , 240volts ,100Watts
2 x heaters 300watts
10 x sponge filters , all air lines .
plus coral for all 10 tanks
The setup does NOT include lights.
.
PLUS
2 x 50 gallon water drums , 1x 3foot with stand , 1x 3foot no stand , both have lids ,filters and heaters .
2 smaller tanks 40cm x 23cm x 30cm plus 1 heater .
This is pick up only , we can help arrange transport in the local Sydney area for a extra fee , otherwise you must dismantle and transport .
This is the best way to save money on power bills , the price is so cheap that if you asked someone to build it for you it would cost more than $4000 dollars .
Any questions please call David 0400168201
this is listed else where and may sell earlier than listed time .
http://i54.photobucket.com/albums/g88/robfishfan/breeders%20setup/davidlimseptbreederssetup2010014.jpg
http://i54.photobucket.com/albums/g88/robfishfan/breeders%20setup/davidlimseptbreederssetup2010023.jpg
http://i54.photobucket.com/albums/g88/robfishfan/breeders%20setup/davidlimseptbreederssetup2010017.jpg
The setup is up and running in chatswood and can be viewed any time by serious buyers .
There are 13 tanks on the rack and all are fully plumed with PVC piping , the setup is run by one water pump and one air pump .
Tanks 10 x 700mm wide x 350mm high x 460mm deep all with lids .
plus one tank same size as above that is split in to two for catfish and is plumed as well ,
last tank is separate from the system and can be used for fry .
The rack is pine 70x35mm painted , 3900mm long x 2000mm high x 600mm deep
The PVC plumbing has taps and overflow pipes for each tank and all drain to one spot ,
There are two power boards installed for running lights .
1 x air compressor HAILEA 25W
1 x water pump MAGNET PUMP MD-40 capacity 52/62 , 240volts ,100Watts
2 x heaters 300watts
10 x sponge filters , all air lines .
plus coral for all 10 tanks
The setup does NOT include lights.
.
PLUS
2 x 50 gallon water drums , 1x 3foot with stand , 1x 3foot no stand , both have lids ,filters and heaters .
2 smaller tanks 40cm x 23cm x 30cm plus 1 heater .
This is pick up only , we can help arrange transport in the local Sydney area for a extra fee , otherwise you must dismantle and transport .
This is the best way to save money on power bills , the price is so cheap that if you asked someone to build it for you it would cost more than $4000 dollars .
Any questions please call David 0400168201
this is listed else where and may sell earlier than listed time .
http://i54.photobucket.com/albums/g88/robfishfan/breeders%20setup/davidlimseptbreederssetup2010014.jpg
http://i54.photobucket.com/albums/g88/robfishfan/breeders%20setup/davidlimseptbreederssetup2010023.jpg
http://i54.photobucket.com/albums/g88/robfishfan/breeders%20setup/davidlimseptbreederssetup2010017.jpg